How to Remove CPU Fan Connector?

 When buying through links on site, we may earn an affiliate commission, at no extra cost to you. 

How to Remove CPU Fan Connector?

The CPU is the technological brain that processes all the instructions, data, and operations of a computer. No matter how powerful this device is if it doesn’t have any good components like a fan to support itself then chances are it will be ineffective in its function.

If overheating occurs within the CPU too many things can happen such as slow performance or even sudden shutdowns but thanks to having cooling parts like fans for adequate ventilation we keep these devices functioning without errors!

When it comes to disassembling your computer, there are two main pieces you need to be careful with: the CPU fan and motherboard. The first step is removing the connectors from both objects so they can’t power up when in a different position on another board or machine.

it’s like an all-clear signal that tells any such device not to proceed until these connections have been disconnected. There may be many questions as to how exactly this should happen; thankfully we’re here for you.

What is CPU Fan Connector?

CPU connector heads a motherboard, BIOS system, or any other existing software on the computer. The tool is the one that allows to regulate and balance the temperature of the processor by working in conjunction with its heat sink. A connection broker registers and verifies that the fan rotates at the maximum possible speed for cooling.

The connectors can house 2, 3, or 4 pins that serve as components to transfer electricity and information between the devices involved. The two pins operate only electrical current. With three, they become a monitor of the fan’s RPM, and with 4, you can configure that RPM. The CPU Fan connector detects any errors in the fan operation.

Its functionality and the perfect connection of the fan with some motherboards are essential to start the computer’s operating system. Also, if this system is running and does not detect any signal from the CPU Fan, it will safely shut down. That occurs as a safety process so that there is no overheating or severe damage.

Top Deals of Day

How to Remove CPU Fan Connector? Detailed Guide

The process to remove the clips that hold the processor fan is done with a flat screwdriver. The clip is gently pressed down (away from the processor) to fully release it from the latch and separate it from the processor. The heatsink is not complicated to remove and has to be done with very little force.

It should note that the system has not been working for a long time or the thermal paste has been applied for a long time. It may be hardened and make extraction difficult. Running the computer a bit will help soften it from the heat. Another way to solve it is by gently turning the heatsink in the same clockwise direction while pulling it up.

If the connector is successfully removed, the CPU will remain seated in the socket, which indicates that it did properly. However, if it ends up separated from it, it may not pose any danger of architectural damage (it shouldn’t happen anyway). Straightening the pins gently is the step that would solve this disadvantage, being quite annoying.

Related: How can I clean my CPU?

How Do You Remove a Fan Pin?

The pins can remove without any problem through a simple step: pull the pin slightly, carefully, and patiently if it presents resistance. It would be best to have a long, thin object for this mechanism, such as a paper clip, needle, knife, or small screwdriver (jewelry box). The thinner it is, the easier it is to remove each pin without worry.

Each connector has a pin for each pin, and they are responsible for ensuring that the pins maintain their connection position. When finding each of these “levers,” with the help of the thin article, the pin must be pressed or bent a little to unlock the respective pin. After this step, the cable can remove most safely and easily.

If you have difficulty removing the pins, you have to stay calm and not make sudden movements to separate them quickly. It should be done with caution and gently pulling until it is completely removed (the pins can reinstall later).

Related: How do you clean thermal paste off CPU pins?

How Do You Remove a CPU Fan Pin from a Motherboard?

Removing a connector starts when the computer is turned off, and the power cable from the fan on the motherboard is disconnected. The best way to remove it is by grasping the end of the connector (cam lever) and gently pulling upward. It is not recommended to hold the cables directly at the time of removal, as it loosens them from the connector.

It is important if it is required to separate the RGB cable from the CPU heatsink along with the RGB header from the motherboard and their respective retention clips. In this way, the disassembly would be carried out without inconveniences or resistance that hinders it. Also, you have to mount the socket cover correctly because otherwise, it will significantly damage the motherboard and pins.

If spring screws are found when removing the CPU Fan connector, each screw from the motherboard is unscrewed and can extract. Removing any case, cover, or gadget around the motherboard is good for the ease of uninstalling a fan.

Buying Guide: Best CPU for RTX 2070

How to Remove the AVC CPU Fan?

Some users have had trouble removing their AVC fans. However, this can solve with practical knowledge. It consists of the fact that the fan is blocked by a black plastic base that joins the heat sink with the motherboard. This connection is made thanks to some retention clips (one on each tab).

The clips are what immobilize the sink. They are like a hook that is located at the bottom of each tab. In other words, a fan cannot uninstall if the clips are not unlocked. Hence the difficulty that many have when removing the heatsink since they do not know about these hooks.

Therefore, removing the fan would be done by lightly pressing the two clips down to release the heatsink from the motherboard. Then it only remains to gently pull the sink (towards the top) under the tabs. When doing this procedure, you have to clean the entire heatsink and the CPU to apply a new layer of thermal paste.


The CPU fan connector is a security model that intelligently prevents any hardware damage. The pin structure and delicate pins should be handled with care when removing the old CPU Fan to avoid damaging it or other components in your computer.

Be careful but also know how to remove each fan from your system if you want to renew its cooling mechanism, which would allow for better stability of both processor temperatures as well as prevent faults within the system itself – without devices like this working together properly, we wouldn’t have computers.

Removing the connectors from the CPU or motherboard is very easy and efficient, but it should not be underestimated. Sometimes mistakes are made because of this, believing that the situation is under control and, in reality, there is no knowledge of what is being done.

Related Guides:

Saqib Ali

Saqib Ali

Saqib Ali is a Computer Science Graduate and passionate about Technology. He loves to write about gadgets, computer devices, etc.

We will be happy to hear your thoughts

      Leave a reply

      Enable registration in settings - general